If you own a house with a pool, then summers might be an amazing time for you and your family. A dive into the cool water is exactly what you need when you are trying to cool yourself down in the heat. But there is the whole issue of cleaning that pool tiles that has to be dealt with.
Well, you can wash the pool tiles using pressure washer. If you don’t know what that means, then you have found your way to exactly where you need to be because we are here to help you out and teach you how to clean pool tile with pressure washer.
Can A Pressure Washer Be Used To Clean Pool Tile?
In short, the answer is yes; you can use a pressure washer to clean pool tile.
I am very aware that you are worried about your pool tiles getting damaged from the pressure washer. After all, there’s no shortage of people who have gone through this situation.
However, you are not going to make the same mistakes they did. Since you have this article to teach you how to clean pool tile with a pressure washer safely.
So, let’s begin.
How To Clean Pool Tile With Pressure Washer
Cleaning the pool is not going to be difficult or confusing if you just have the items necessary or available for rent, and if you know when to do what. Armed with all the necessary equipment, cleaning the pool is going to be really easy for you.
Step 1: Get a Pressure Washer
The first thing you will need is a pressure washer. You might have this already. If you do not, then you can always go and get it. Renting or borrowing it from a friend might be a good option too.
But, if you have a swimming pool, then it is wise to have one at home, as you might have to keep borrowing from your friend every time you want to clean the tiles.
Now, if you are in the market for a pressure washer, then you need to list out all the things you want from your pressure washer. Knowing beforehand will make it easier for you to look for and buy the item you need. And the whole process will take much less time.
Step 2: Clear Out the Pool
The starting point of the tile cleaning process should be to clearing out the pool. By clearing out, I do not mean draining out the water. That would be a huge task and could take a very long time to complete. Rather, by clearing out, I mean making sure that there is no debris floating around in the water.
This will just slow you down, and you will require a much longer time cleaning up the tiles. So, with a skimmer, you could go over the length of the pool and extract everything floating on the water. This might include leaves and other matters from the outside.
Step 3: Check the Water Pressure
Making sure the pressure is just right for your tiles is very important!
If you do know how to check the pressure or what the water pressure of the washer should be, then you can always look it up in the instruction manual provided to you along with the washer.
Once you know the setting and all, you should not have any problems testing the unit.
The pressure needs to be tested for two reasons; firstly, the pressure should be enough to clean the tile, but not so much that it will damage the tile. So, run water on a tile that is the least exposed. So that if it does get damaged, then no now will know. You should run it for about 30 seconds max.
Normally, 3000 PSI should be just right to clean up your tiles, but when you are dealing with the more fragile tiles, a lower setting will prevent it from getting damaged. So, for that 2500 PSI would be better.
Step 4: Work with a Section
It would be the best idea to work with the tiles in smaller sections. That way, you will have an easier time cleaning the pool tiles with the pressure washer. And you will also be able to ensure that the tiles are actually being cleaned properly.
Once you are done working with one of the sections and are satisfied, you can move on to the next one.
There are certain corners and nooks in the swimming pool, to reach those corners you might have to change the head or the nozzle of the pressure washer and replace it with a smaller one.
Step 5: Ensure Proper Cleanup
If you want to make sure the pool tiles are absolutely clean, you have to put some pressure on the calcium build-up, which is one of the main areas of concern when it comes to these pool tiles. They make the surface slippery and lead to accidents.
Once you are done cleaning those up, you must wipe away the tiles you pressure washed to make sure all the residue is gone.
Be Sure to Ensure Safety!
If you followed the steps given above, then you should be able to get the job done without much problem and by now should be done. But there is one thing you need to be conscious about before you get to the job; safety.
First and foremost, you have to be mindful of your own safety. Wear all the necessary gear for the task. Along with that, you should try to keep your distance from the water to avoid splashing all over your clothes.
Things to Keep in Mind for Not Damaging Pool Tile
Here are the things you need to keep in mind in order to protect the pool tile.
Do Not Put Too Much Pressure
If it’s your first time, you are likely to make a common mistake; using too much pressure.
But the trick is using less pressure while cleaning. I’d suggest that you use something around 3000 PSI, which would be perfect for the job at hand.
However, if the tiles aren’t in very good condition, you can use PSI as low as 2000.
Don’t Get Too Close to the Tiles
A bad idea would be spraying the tiles from a very close distance. You might think that it would be helpful for the cleaning, but it isn’t.
As you might know that the spray water is concentrated, and such concentrated water can impact the condition of the tiles negatively.
So, in order to prevent that, you need to spray from at least 3 meters.
Get the Perfect Nozzle
Some individuals often choose nozzles that exert too much pressure on the tiles, which results in broken tiles. So, you need to avoid that.
Thus, you need to get a nozzle with less pressure to protect your tiles.
Don’t Overdo the Spraying
Now that’s tempting. Spraying one place for too long is a mistake that we all do. But that must be avoided if you care about the tiles.
Unless your tiles really dirty and full of grime, you shouldn’t spray in one place for more than half a minute.
And with that, we are done cleaning the pool tile with a pressure washer. The task is not difficult, just a little long, and might become a little boring. So, you will require a bit of patience for the task.
Shop Related Products
Last update on 2023-03-20 / Affiliate links / Images from Amazon Product Advertising API
Last update on 2022-07-10 / Affiliate links / Images from Amazon Product Advertising API