Best Pressure Washer Pump Reviews–Comprehensive Buying Guide for 2021

Are you tired of using scouring chemicals and detergents to clean surfaces with no positive results? We have the solution for you. The pressure washer pump will sort out your problems with remarkable results, ease of use, and efficiency.

A pressure washer pump is a water pump that is powered by an electric motor. The best pressure washer pumps have unique features from efficiency to quality and durability.

 Pressure washers clean surfaces using high-pressure water released from the system. This article highlights the best pressure washer pump you can buy as well as some important considerations you should have in mind. Read along.

When to replace your pressure washer pump

The pressure washer pumps have a lifespan within which they work efficiently. There are cases, however, where you may have to replace the pressure washer pump. The cases include:

 • When the pump gets damaged in the inlet water supply by air.

 • If there are no pressure or low water pressure issues that are persistent due to a faulty pump

 • When the pump keeps on leaking and has broken seals that are cracked or worn out

 • You can also replace the pressure washer if you are looking for an upgraded version that fits your pump.

Factors to consider when purchasing the best pressure washer pump

Right pump type – The type of pump that you buy has a lot to do with how long it is going to serve you. The different types are Axial, Wobble, and Triplex. While most of the commercial pumps use axial pumps, Triplex is the most durable while Wobble comes in last.

Pressure levels – The pressure levels of the pressure washer that you want is another crucial factor to consider. High pressures are the most effective, especially when conducting thorough cleaning and when working on tough surfaces. 

Flow rate – The flow rate measured in Gallons per minute (GPM) is an essential aspect of the pressure cleaner. More flow rates mean you will spend less time washing hence consider higher GPM machines for fast and efficient work.

Matching PSI and GPM – The Pounds per square inch (PSI) and the Gallons per minute (GPM) which determine the flow rate and the pressure are supposed to match. The reason behind this is that the pressure will always determine the flow rate of the pump that you purchase.

The viscosity of the fluid – Most of the time, the pressure washers use water for cleaning. In case there is a unique element needed in washing that may alter the fluid’s viscosity, it is vital to consider this in mind. The viscous liquid will need more pressure and higher flow rates to work effectively.

Warranty and support – A warranty is an essential aspect of the pressure cleaners. It serves as an assurance by the manufacturer that the pump will function effectively under specific conditions. If the product malfunctions, you can always get it replaced by the manufacturer. Always consider the availability of support for the particular type of pump that you are purchasing.

Benefits of Pressure washer pumps?

 • It helps to save on time as compared to other methods of washing

 • It helps you to save money by using less water and increasing the life of surfaces.

 • Thorough and efficient cleaning even for the toughest surfaces

 • The pressure pumps help to increase the appeal of your curb and the value of your home

 • It is fun using the pressure washer as compared to other methods of cleaning.

Attributes that differentiate the pressure washer pumps

Gas and electric use – The pumps can either be designed to use gas or electricity. The critical determining factor in this regard is the nature of use, the hours, and the convenience either method offers. The electric pumps make use of motors to power pump while the gas pressure cleaners use engines.

Hot water and cold water pumps – The pressure washer pumps can either come as hot water or cold water pumps. Those that use hot water are much more effective than those that use cold water but cost a lot more.

PSI and GPM – The Gallons per minute (GPM) and the Pounds per square inch (PSI) determine the pressure and the flow rates of your pressure washer. The pumps with more flow rates are much more convenient since they help you save on time, while higher pressures are more useful for thorough cleaning.

Pump types – Different pressure washer pumps have different types of pumps. The most common among the residential pressure washers is the axial cam pumps. The others include the Wobble pump, which is not replaceable, nor can it be repaired. It has an estimated lifespan of 3 years when used for 2 hours every weekend. The Triplex pump is efficient for daily use. It is by far the most durable among the pumps with a lifespan that is 10x that of the axial pump.

What’s the best way to use pressure washer pumps?

 Due to the extreme pressures that can be delivered by the pressure washers, it is essential to observe caution when using them. You must never point it at people or pets. Doing this may result in cuts or serious injuries. It is also advisable for you to wear safety glasses and to maintain a considerable distance of about 6 feet around electrical outlets and power lines.

 Always remember to engage the safety lock located on the trigger when not using the pressure pump or when changing the tips of the nozzle.

Click to watch

Prerequisites/precautions

You mustn’t use the pressure pump when standing on ladders since the force of the recoil can throw you off. Always remember to stop the washer, turn off the water faucet and ensure all pressure in the system is released before you uncouple the hose.

Best Pressure Washer Pump reviews 

 

Briggs-Stratton-207365GS-Pressure-Washers


This pressure washer has a robust 2350 PSI and a flow rate of 2.0 GPM. This factor makes it very useful for systems with low input and output pressure washers. It has a shaft key with six bolts, which makes it easy to install. 

 The pump’s design comes with brass, stainless steel, and aluminum, which translates to high-quality parts and enhanced longevity. The pump also comes with a thermal relief valve and a built-in unloader lever for an easy and smooth start. 

Click to check the product

Pros

 • The pressure washer has parts that are of high quality

 • It has a robust 2350 PSI

 • It is rather easy to install

 • It comes with a thermal relief valve and built-in unloader

Cons 

 • The washer is costly

 • The PSI and GPM are considerably low compared to others.

Annovi-Reverberi-RMW22G24-EZ-Triplex-Vertical


This pump is efficient in cleaning and washing of surfaces and a suitable option for the household. It is easy to start and operate and comes with a 2400 PSI and 2.2 GPM. The pump also features pressure control valves that are inbuilt, which helps regulate pressure.

 The Annovi RMW22G24 comes with an inbuilt loader enhancing the ease of use. The pump features a shaft of ¾ inch, which makes it compatible with several engines. It also comes in two different mounting configurations with a mounting flange that provides connections to the gas engine. The pump has a double gasket sealing design with a chemical injector and automatically driven pistons, which enhance the pump’s performance.

Click to check the product

Pros

 • The pump is easy to install 

 • It has a sufficient water flow

 • It has a design that is robust and attractive

 • The pump has different configurations for mounting

Cons 

 • The longevity of the pump is in question 

Homelite-Universal-Pressure-Pump

This universal pressure pump comes with a 2800 PSI and 2.5 GPM. The pump comes with sealed pre-filled oil to help in saving on maintenance costs. It comes with two hoses and three bolts, which makes it easy to install.

The pump has a thermal relief valve, which helps in preventing overheating. You can install the valve opposite the position of the inlet fitting.

Click to check the product

Pros

 • It has a high-pressure output of 2800 PSI

 • It is convenient for hook up hoses due to the back hook fitting

 • It is easy to use and install

 • It comes with a thermal relief valve in a separate box

Cons 

 • It is difficult to change the oil as there is no access hole.

 • The pump does not suit all models.

OEM-Technologies-Horizontal-Axial-Pump


This pressure washer pump is one of the best in this list. Designed with a robust 3100 PSI and a GPM flow rate of 2.5, it is useful in cleaning tough surfaces and getting the job done fast. The pump also comes with a dual seal system capable of preventing leaks in the system’s lifespan. 

The pump uses pistons made from stainless steel, which gives it longevity and assures you of prolonged service. It also features thermal relief protection, which is beneficial in damage prevention for the hot temperatures. It also has a built-in unloader that gives you a smooth start.

Click to check the product

Pros

 • It is very durable

 • The pressure washer pump comes with a strong 3100 PSI

 • It has a double seal system

 • It has a universal fit gas engine flange 

Cons 

 • The brass mounts are cheap hence no proper quality

 • It is not easy to install the pump

AAA-Technologies-Triplex-Plunger-Pump


This pump is among the best commercial pumps. It comes with a triplex plunger pump built to last with a robust 3800 PSI and a flow rate of 3.5 GPM. It also has a crankcase made from die-cast aluminum that is durable and ceramic-coated pistons, which help in preventing overheating. 

 Thermal relief protection is integrated into the pump to break any instances of overheating. The pump also has ball bearings that are radial and over-sized to increase mounting support. The presence of an unloader system that is adjustable makes it easy to adjust pressure for effectiveness. 

 It is more expensive but comes with a limited five-year warranty on all parts.

Click to check the product

Pros

 • It has a powerful 3800 PSI

 • It has thermal relief protection

 • It has an adjustable unloader system for ease of pressure adjustments

 • Ceramic-coated pistons to avoid overheating

 • The pump has an advanced oil seal that is pre-filled

Cons 

 • It has plastic valve retainers which quickly wear out

 • The pump is costly in terms of pricing

Horizontal Pump – 3/4“ Shaft – 2800-3000 PSI


This gasoline pressure horizontal pump is a replacement or the OEM for several models. It has a 2800-3000 PSI and a flow rate of 2.5 GPM, making it very convenient for tasks such as home cleaning. The pump comes with a ¾ shaft, which is common among the pressure washers hence eliminating the need for extra fittings.

 The pump has parts built with quality materials and a built-in unloader for effective control and regulation during use. It also comes with a thermal relief valve to eliminate the causes of overheating that may arise.

Click to check the product

Pros

 • The presence of a thermal relief valve helps protect against overheating

 • It has a built-in unloader

 • It is compatible with several other models of pressure washers

 • It is durable due to the design and materials used in its construction

Cons 

 • It may require extra fitting devices

 • Installation may be problematic in other models

Vertical-Pressure-Replacement 2700 2.4 GPM 


The vertical pressure replacement pump comes with a 2700 Psi and water flow of 2.4 GPM, which is convenient for your tasks. The design of the pump allows it to be compatible with many brands of pressure washers. It is lightweight at only 4 pounds; hence, it does not add to the machine’s weight. 

 It is one of the most affordable pumps in the market with excellent performance and enhanced durability. 

Click to check the product

Pros

 • It is compatible with several other brands

 • The pump provides sufficient water flow

 • It is easy to install

 • It is lightweight hence does not increase the weight of the machine.

 • It is cost-effective

Cons 

 • Does not have a thermal release valve

 • It does not have sufficient power for heavy-duty works

AR North America Triplex Plunger Pump


This pump features the Triplex plunger technology, which is the latest technology in the design of pumps. The pump comes with a coupler for quick connections, a nipple, inlet filter, and a detergent hose that comes with a filter. 

 The pressure of this pump is remarkable, with 4000 PSI and 4 gallons per minute. This feature is beneficial since it allows you to get the job done quite fast and is also useful for tough tasks.

Click to check the product

Pros

 • It has very high pressure of around 4000 PSI

 • It has a high flow rate of 4 gallons per minute

 • The design of the pump uses the latest design and technology

 • It is convenient for both heavy and medium cleaning

Cons

 • It is not very durable

 • It takes more than one pull to start the motor

Common Causes of Pressure Washer Pump Failure

Pressure washer pumps come with a predefined hour rating in terms of life expectancy. Cheaper pumps could have an expected lifespan of 200 hours while commercial-grade models could be rated to put 5000 hours of work even. If your pump manufacturer has specified it which not all of them do, it should be somewhere in your user manual book.

However, your pressure washer pump may last longer or shorter than the specified time depending on how you use it. The reason behind your pressure washer pump failure isn’t always natural wear and tear. 2 common reasons could cause your pump to fail earlier than expected:

Cavitation 

Cavitation occurs quite frequently when there’s insufficient flow of supplied water or rapid changes in water pressure. Cavitation indicates the scenario when bubbles or vapor-filled cavities from inside the pump.

How do you tell when cavitation has occurred? You might notice some difference in the pump sound, your wand will feel unstable and vibrate a little when you’re spraying, and you’ll feel surges of pressure,

The prime reason behind cavitation is insufficient water supply. The water source you connect the pressure washer to, needs to be capable of supplying enough water to the washer according to its GPM rating. Fluctuations in that will lead to cavitation most of the time.

The water supply should be capable of supplying more water than the pump requires according to its GPM rating. If it fails by a little margin even, for example, say your pressure washer is rated for 3 GPM while the source can supply 2.8 gallons per minute, the discrepancy is big enough for trouble to appear.

How do you know if your source can supply enough water?

Take a 5-gallon bucket and fill it from the faucet directly, and note the time it requires to do so. Do the math and you’ll get how many gallons of water per minute your source is capable of delivering.

Bypass water overheating

No matter whether you’re spraying through the nozzle or not, your pressure washer pump keeps building the pressure inside when it’s turned on. So what happens when you receive a phone call mid-session or re-arrange the tools you’re working with when the pump keeps running?

Does it burst up since you’re not releasing the pressure by squeezing the nozzle trigger? Well, not really, but also keep in mind that there’s only so much pressure build-up your pressure washer can handle.

To not cause the pump to burst up, it has a pressure or water bypass mechanism in it. So it’s no pressure build-up that we’re worried about, rather it’s about the heat that is generated in the bypassing process.

So when there’s enough build-up of unreleased water pressure, your pump activates the unloader valve within it and lets the water flow through a bypass route. The water thus is depressurized and sent through the pump again, and the process is repeated until the water is eventually released. 

However, though it protects your pump from bursting out, the crankcase generates heat in this process which is meant to be mitigated by a constant flow of fresh, cold water. But when the pump is kept idle for too long, it’s the same water that’s passing through the pump over and over again, which keeps getting warmer and warmer.

For most of the pressure washers, the maximum safe temperature is only a bit above 60 degrees Fahrenheit, which isn’t much. So, when the pump is kept idle for a long time, it could generate enough hits to damage your machine.

Most pump manufacturers rate their pump for 2 minutes of switched on and idle time, but not going over a minute is a wiser choice. Instead, you could simply turn off the unit and restart after you’re done with what you had to get done and it will prolong the lifespan of your pump.

Expert Tips on Best Pressure Washer Pump

Like any other mechanical or electrical part, you need to take proper care when using the pressure washer pump. Make sure to consistently follow through with the necessary maintenance routines as specified by the manufacturer.

In case of repairs, always refer to your warranty to know whether you can repair or take it back to authorized repair shops. Remember to periodically change the oil and lubricate the pump’s internal moving parts to prolong its life.

Did You Know?

Did you know that pressure washer pumps have different color codes for nozzles? A white nozzle tip signifies high streams, which then narrows its application to green then to yellow, and finally to red. The black colors signify the least pressure output. These colors aim at assisting you in finding the right pressure settings.

 

FAQ About Pressure Washer Pump

Why do pressure washer pumps fail?

The pressure washer pumps are a set of systems with both mechanical and electrical properties. With time, these components wear out and undergo degradation with continued use. Factors such as cavitation and overheating will plague the functionality of the pump. 

Can I upgrade my pressure washer pump?

Yes, you can upgrade the pressure washer pump, but under specific conditions. The pressure washer pumps are not all the same. They have different specifications and may not fit your pressure washer. 

First, you need to determine the types of pressure washer pumps and the uses, and the exact specifications to ensure there is compatibility.

Do pressure washer pumps need oil?

Yes, the pressure washer pump needs its internal surfaces to be lubricated to reduce the friction of the parts. The oil also helps in slowing down the wear and heating of the internal components.

How Long Will A High PSI Pressure Washer Pump Last?

A pressure washer pump comes at different prices. The lower-priced ones are of low quality with an average life expectancy of about 70 to 100 hours of use. Those with better quality have a lifespan of roughly 500 hours. 

The typical households use the pump for about 50 hours a year, which translates to about ten years for the quality pressure pumps and a year or two for the lower-priced pumps.

What is the cheapest pressure washer water pump?

The cheapest pressure washer water pump is the wobble pump. 

Is there any need to change gaskets?

You may need to replace the pressure washer gaskets if they are torn or damaged. Failure to do this will cause the engine to run rough. Please take the necessary precaution of cleaning the surfaces before changing them.

What is an airlock?

An airlock in a pressure washer pump is a stoppage or a limitation in the flow of liquid in the pressure washer pump. When the gas rises to high points within the pump, it inhibits the fluid flow hence referred to as an airlock.

Should I grease the bearings of the pump kit?

The bearings of the pump are prone to wear and tear due to the friction they undergo when the pump is operating. There are several considerations before you do this. First, determine if this will void the warranty and the specifications, if any, from the user manual. Ensure to use the recommended lubrication if the user manual and warranty allow you to grease them.

Conclusion – Best Pressure Washer Pump Reviews

The AAA-Technologies-Triplex-Plunger-Pump is the winner in this category. Coming with a powerful 3800 PSI and 3.5 GPM, this washer pump excels in thorough cleaning with effectiveness and speed. Although the pump is a bit costly, the durable build and triplex plunger pump makes it a worthy investment.  

Among the pressure washer pumps, it stands out with the die-cast aluminum crankcase and ceramic-coated pistons to eliminate overheating. It also has excellent support and mounting systems, which only add to the ease of use and installation.

These are among the best pressure washer pumps that you can obtain from the market. It is essential to consider all the factors listed in this article to make an informed purchase.

Share on facebook
Share on twitter
Share on pinterest
Share on email
Share on print
Brett Tyler

Brett Tyler

I’m Brett Tyler, an entrepreneur, but more importantly (well, to me at least), a tool head. I’m passionate about all sorts of machines and how they work – it’s in my blood.

Leave a Comment

Your email address will not be published. Required fields are marked *